Unique Interlocking Carpet Tiles

Interlocking Carpet Tiles - Available in 6 Colours

Carpet Tiles are made of a dense low loop polypropelne pile, featuring interlocking edge, with adhesive offset.
The unique interlocking edge design allows tiles to be fitted to form any shape, and means that tiels can be assembled on any hard surface such as wood, laminate, vinly, even concrete, without seperating. Carpet Tiles therefore require no permanent fixing such as adhesive, wooen battens, or walls? The tack adhesive assists in holding the tile in place, yet permits eas removal when required. Light weight and eas to fit, move, and store, Carpet Tiles can be laid temporarily or permanently.

They are also easy to clean and stain resistant, and can be washed with standard household cleaners, (even bleach), and will not fade.

Each tile 30cm x 30cm (12inc x 12 inc)

We do not supply edges as the amount can vary depending on the area and shape laid. One of three choices can be selected:

1 - Leave the tiled area unedged
2 - Cut the interlock of the edge tiles, leaving straight edges
3 - Cut edges for the surround.
We can supply a kit to make you own edges, or they can easily be made at home.

Instructions

To make edges at home:
All you require is a sharp knife. A metal strip slightly longer than the tile and a cutting board. If you have a metal strip 90mm wide by 300mm plus all you need do is place the tile in position, place the metal with one edge on the edge of the carpet interlock and holding it firmly cut with a good pressure in one long cut, repeating, if not fully cut on the first pass without moving the metal strip until the material parts. Repeat on the other side for the second edge. For corners place the edge in position on the corner and cut of the end sticking out with the same metal strip The two edges should give four corners. The 90mm width is designed to give an edge with the correct spacing at the end interlock.

Price: £1.90 (Including VAT at 17.5%)

Colour Choice

Quantity: